No.172

'03 09.05

ドア内張の外し方 投稿者：KEIGO

1. Remove the door handle (2) cover by prying off at the bottom with the wedge.

2. Remove the screws. (3)

3. Unclip the SRS badge and remove the screw. (10)

4. Remove cover (4) with wedge.
5. Pry door liner (1) off of the inner door panel at bottom, front and rear by positioning the wedge directly next to each clip. (5)

6. Lift door liner up and out.

7. Unhook control cable (6) from door interior actuating mechanism.

8. Remove the entry lamp. (9)
9. Pull down door liner.

10. Check the sheet metal clip nuts (7) and replace any broken ones.

11. Also check the door foil (8) on the inner door panel and the clips (5) on the door. Replace any broken ones.

12. Reverse order to reinstall.
1. Door liner
2. Door handle cover
3. Screw
4. Cover
5. Clip
6. Control cable
7. Metal clip nuts
8. Door foil
9. Entry lamp
10. Screw